Three-dimensional mounting + metal print of the metal frame of the archives, new on the shelf

Sorry to keep you waiting for a long time, the highly requested three-dimensional mounted metal print is finally available for order~

Sister Wei Si, who likes photography and is used to printing works, sometimes misses the traditional way of mounting photographs - Bookmat type mounting! It's not that I miss the "cardboard mounting" part, because the paper still has the problem of moisture and mildew, but I miss this "blank space" method, so that the works can have a space to breathe and display.

Do you love metal prints as much as we do, but at the same time want your work to be framed in the following way?

• I like the simple and modern narrow frame (outer frame)
• It is hoped that a white base plate will be added between the work and the frame to make the work stand out more
• It is hoped that the material of the work and the white base plate has the same quality, but is slightly different
• I hope that there will be a slight level difference between the work and the bottom plate, so that the work will stand out more
• The works and frame should be made of aluminum

If you think the above features are attractive to you, welcome to try our latest "3D Mounting + Collection Metal Frame" next time you print metal prints~

Now let's take a look at the actual works of "3D Mounting + Collection Metal Frame" in less than two minutes of video, as well as a brief introduction...

Suitable for metal prints of various sizes

Three-dimensional mounting is suitable for metal prints of various sizes. The largest size we have mounted so far is 80cm x 150cm. In fact, the frame size of metal prints is 70cm x 140cm. Although we have specially strengthened the structure when mounting, if your work needs to be frequently moved or displayed in different places, we still recommend adding three-dimensional mounting to the overall frame. The long side should not exceed 110cm , and the structure will be more stable!

Three-dimensional mounted metal print + metal frame for collection, the overall visual effect

Bottom plate

• We use a 3mm thick white plastic-aluminum board. In addition to the long-term preservation of the material, the surface of the plastic-aluminum board has a little luster, which sets off the metal impression. We think the overall visual effect is very good
• The size of the overall bottom plate will be about 10cm (4") longer and about 10cm (4") wider than the work. Therefore, each side of the metal print will be about 5cm smaller than the bottom plate
• If you want other blank sizes, please contact us, we can customize according to your needs

metal prints

• Like other mounted metal prints, it is presented with rounded corners on each side, and the size of the rounded corners is 1/8"
• The metal print will be padded with a PVC hard plate, and the height of the padded is about 0.4cm (4mm)
• The size of the PVC hard plate will be 4" (10cm) smaller than the length and width of the metal print, so when viewing the work, the PVC hard plate cannot be seen from the front, forming the effect of the work floating on the white base

Archive metal frame

• Side height 4cm, front width 0.6cm, inside height 1cm
• The metal print on the white base plate, after adding the PVC hard plate, the overall height is about 0.6cm
• Viewed from the side, the metal print is about 0.4cm lower than the inner height of the metal frame, which is a comfortable arrangement

We currently have six colors of metal frames to choose from, the colors are as follows:

• silver
• antique silver
• gold
• brown
• Brown
• black

The actual production of the three-dimensional frame + the metal print of the metal frame in the archives

Print details for the following works:

• Metal Imprint Size : 18"x12"
• Surface material : high gloss surface
• Hanging accessories method : three-dimensional mounting + metal frame collection
• Accessory Color : Brown
• The size of the whole work (including frame) : inner diameter 22"x16" (outer diameter 56.4cm x 41.1cm)

If necessary, welcome to order directly on our official website. When ordering, please choose the appropriate product according to the size of the metal print , and then select the required mounting details!

For example, when you want to make a work of the above size, please first choose a 18" x 12" (banner) product, and the inner diameter of the finished metal frame will be 22 " x 16" .

More information about framing

If you want to know the price of metal printing and various aluminum frames, please refer to our price list .

If you want to know the frame details of our "frameless picture back hanging frame", "simple metal aluminum frame" and "collection metal aluminum frame", please refer to the metal aluminum frame with both texture and beauty .

If you want to know about our "double-layer three-dimensional aluminum frame", please refer to the new launch of double-layer three-dimensional aluminum frame and the new use of metal printing .