- 3D mounting + classic metal frame

Baseplate Description

  • The 3mm thick white plastic aluminum plate is used. The material can be preserved for a long time, and the glossy surface can set off the brightness of the metal photo.
  • The base will be approximately 10cm (4") longer and 10cm (4") wider than the artwork.
  • That is to say, each side of the metal photo will be about 5cm smaller than the base plate.

Metal Photo Work Description

  • The four corners of the metal photo will be rounded, and the size of the rounded corners is 1/8"
  • The metal photo will be raised with a PVC hard plate, the height of the raised plate is about 0.4cm (4mm)
  • The size of the PVC hard plate is 4" (10cm) smaller than the metal print in both length and width, allowing the work to float on the white base.

Collection Metal Frame Description

  • Side height 4cm, front width 0.6cm, inside height 1cm
  • The metal image on the white base, with the PVC hard plate, has an overall height of about 0.6cm
  • When viewed from the side, the metal print is about 0.4cm lower than the inner height of the classic metal frame, which is a comfortable arrangement.

Actual size details after mounting

For example:

  • Metal Photo Size: 18" x 12"
  • Hanging accessories: three-dimensional mounting + classic metal frame
  • The size of the whole work (including frame): inner diameter 22"x16" (outer diameter 56.4cm x 41.1cm)

When ordering, please select the appropriate product according to the size of the metal print , and then choose the required mounting details!
For example, if you create an 18" x 12" piece, the inside diameter of the finished collector's metal frame will be 22 " x 16" .